The Geoprobe®7822DT is a fully hydraulic track mounted remote controlled multi-purpose drill rig. Equipped with a G64 hydraulic hammer with built in rotary spindle for concrete drilling and anchoring, this rig has over a 24 ton pulling capacity for larger tooling and deeper depths, as well as an improved auger head for turning hollow stem augers. The compact size and rubber tracks, which reduce ground pressure, allow the rig to get into buildings and drive over sensitive landscaped areas with virtually no damage to the ground/floor surface…more
The Geoprobe®7822DT is a fully hydraulic track mounted remote controlled multi-purpose drill rig. Equipped with a G64 hydraulic hammer with built in rotary spindle for concrete drilling and anchoring, this rig has over a 24 ton pulling capacity for larger tooling and deeper depths, as well as an improved auger head for turning hollow stem augers. The compact size and rubber tracks, which reduce ground pressure, allow the rig to get into buildings and drive over sensitive landscaped areas with virtually no damage to the ground/floor surface…more
The GM100 is a fully hydraulic, rugged and mobile multi-purpose drill rig for Environment and Geotechnical site investigation, Exploration Drilling, Rock Drilling with Air or Core Drilling…more
The Geoprobe® 6620DT is a fully hydraulic, rubber track mounted mobile remote controlled drill rig equipped with a very powerful hydraulic hammer with built in rotary spindle for concrete drilling and anchoring, over 20 ton pulling capacity. The compact size and rubber tracks which reduce ground pressure allows this machine to get inside buildings and drive over sensitive landscaped areas with virtually no damage to the ground/floor surface. Also is equipped with an Automatic Drop Hammer (ASTM cert.) for any Geotechnical site investigations (SPT, DCPT, CPT, and Seismic CPT)…more
The Geoprobe® 6620DT is a fully hydraulic, rubber track mounted mobile remote controlled drill rig equipped with a very powerful hydraulic hammer with built in rotary spindle for concrete drilling and anchoring, over 20 ton pulling capacity. The compact size and rubber tracks which reduce ground pressure allows this machine to get inside buildings and drive over sensitive landscaped areas with virtually no damage to the ground/floor surface. Also is equipped with an Automatic Drop Hammer (ASTM cert.) for any Geotechnical site investigations (SPT, DCPT, CPT, and Seismic CPT)…more
The Geoprobe® Model 540MT direct push machine is a rugged, compact probing unit designed for tight spaces and rough terrain. Easily maneuvered by 2 people, the 540MT is less than 29” high. The rear wheel and handle pivot 360o to deliver the tightest turning radius possible…more
The Geoprobe® Model 540MT direct push machine is a rugged, compact probing unit designed for tight spaces and rough terrain. Easily maneuvered by 2 people, the 540MT is less than 29” high. The rear wheel and handle pivot 360o to deliver the tightest turning radius possible…more
Strata Drilling Group uses Geoprobe® direct push track mounted technology. The Geoprobe® Model 54LT direct push machine is a rugged, compact probing unit designed for tight spaces and rough terrain . This unit is narrow enough to fit through a standard 36” door to get into confined, enclosed places a vehicle mounted unit can not access…more
Strata Drilling Group uses Geoprobe® direct push track mounted technology. The Geoprobe® Model 54LT direct push machine is a rugged, compact probing unit designed for tight spaces and rough terrain . This unit is narrow enough to fit through a standard 36” door to get into confined, enclosed places a vehicle mounted unit can not access…more
Strata Drilling Group uses Geoprobe® direct push technology to access small, as well as large testing areas. The Geoprobe Model 420M is a compact probing unit designed for tight spaces. This powerful little machine is designed specifically to be durable yet as lightweight as possible. At 19” wide and 62” tall (folded) and weighing less than 425 lb, the 420M can be manually lifted and carried to remote sampling locations. It can also be deployed to hard-to-reach and narrow sampling locations both in doors and out. The 420M is powered by a remote hydraulic power source…more
Strata Drilling Group uses Geoprobe® direct push technology to access small, as well as large testing areas. The Geoprobe Model 420M is a compact probing unit designed for tight spaces. This powerful little machine is designed specifically to be durable yet as lightweight as possible. At 19” wide and 62” tall (folded) and weighing less than 425 lb, the 420M can be manually lifted and carried to remote sampling locations. It can also be deployed to hard-to-reach and narrow sampling locations both in doors and out. The 420M is powered by a remote hydraulic power source…more
In-Situ remediation is one discipline within the broader scope of Environmental remediation. Strata Drilling Group is the leading provider of direct injection equipment & services through direct push points that can be used for distributing high viscosity agents and caustic remediation fluids throughout the entire site where permanent treatment systems are not desired, necessary or feasible. Periodic direct injection of remediation products can be a cost efficient, noninvasive cleanup method…more
In-Situ remediation is one discipline within the broader scope of Environmental remediation. Strata Drilling Group is the leading provider of direct injection equipment & services through direct push points that can be used for distributing high viscosity agents and caustic remediation fluids throughout the entire site where permanent treatment systems are not desired, necessary or feasible. Periodic direct injection of remediation products can be a cost efficient, noninvasive cleanup method…more
ADDITIONAL EQUIPMENT:
|
REMOTE LOCATION EQUIPMENT:
|
|
AUXILIARY EQUIPMENT:
|
DECONTAMINATION STATION:
|
